- 2020年05月20日 12:17 Increasing the injection pressure of the mold can reduce the shrinkage
- 2020年04月16日 11:55 The impact of injection molds on the plastics industry
- 2020年04月09日 11:02 The movable side is fixed to the movable plate of the molding machine
- 2020年03月26日 11:32 For domestic plastic mold enterprises
- 2020年03月16日 11:10 Can process difficult molding materials and achieve the best injection molding effect.
- 2020年03月04日 12:22 The above is the plastic mold manufacturer to share with you the four conditions
- 2020年02月22日 12:53 Insufficient filling often occurs in the production of injection molds
最新の日記
| 日 | 月 | 火 | 水 | 木 | 金 | 土 |
|---|---|---|---|---|---|---|
| 29 | 30 | 1 | 2 | 3 | 4 | 5 |
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | 31 | 1 | 2 |
- Increasing the injection pressure of the mold can reduce the shrinkage
- The impact of injection molds on the plastics industry
- The movable side is fixed to the movable plate of the molding machine
- For domestic plastic mold enterprises
- Can process difficult molding materials and achieve the best injection molding effect.
お気に入り日記の更新
テーマ別日記一覧
まだテーマがありません