The above is the plastic mold manufacturer to share with you the four conditions

The above is the plastic mold manufacturer to share with you the four conditions that must be met in order to achieve the best plastic mold temperature control. The temperature control unit must be able to maintain the average plastic mold required within tight limits. !.In order to achieve optimal plastic mold temperature control, these four conditions must be met. Wall temperature, no matter what production conditions. Channels, surfaces are available and must be provided for temperature control adaptation, especially for molding corners and cores (angular deformation). If you want to learn more related knowledge, you can continue to pay attention to my official website. If the cooling channel is too small, the high pressure drop is the result, because it is too large, resulting in a low diameter Flow velocity, turbulence in the cooling channel is the primary reference for the effectiveness of the cooling system. Second, the size of the heating cooling channel heating cooling channel considers the size connection, the pressure that must be given needs to be used to transport the coolant in the mold. Therefore, it is divided into several parallel circuits and placed on the assembly so that the temperature difference does not become too large, and the size and quality requirements necessary. I hope you will understand after reading.
Plastic mold, an abbreviation for a combined plastic mold for compression molding, extrusion molding, injection molding, blow molding and low foam molding. Fourth, the coolant and temperature control unit coolant should have good performance. In order to achieve optimal plastic mold temperature control, these four conditions must be met: First, the position of the heating and cooling channels is heated and the number and position of the cooling channels should be such that all mold parts are uniformly temperature controlled to ensure a sufficiently large heating and cooling. Water has proven to be small household appliances OEM factory https://www.nbtianke.com/product/ the ideal coolant for thermoplastic processing. Third, the temperature difference between the temperature difference inlet and the outlet temperature of the coolant should be as small as possible